USB 2.0 A Male USB Charging Connector , Plug Jack Mounting Solder 4 Pin PCB Connector
Product Name : USB2.0 A Type Female Plug;Type : Solder Type
Dimension : 2 x 1.2 x 0.45cm/ 0.8" x 0.5" x 0.18"(L*W*H);Material : Metal, Electric Parts
Main Color : Silver Tone, Black
Weight : 20g
Package Content : 10 x USB2.0 A Type Female Plug Connector
Product Description:
This USB A Type Female plug connector can be used very widely.
Good replacement for the old and damaged ones.
Features:
1. With A Type/B Type/C Type and Mini USB variety of types of public Socket Interface Design;
2. Installed in the form of DIP/SMT/clip wire/wire type available;
3. Flexible design of terminal contact area to ensure good contact performance and long life requirements;
4. Meet a variety of welding equipment parameters temperature requirements
Welding conditions:
1. Hand soldering
Use a soldering iron of 30 watts, controlled at 350º C approximately 3 seconds while solder applying.
2. Wave soldering/Reflow Soldering
The peak temperature of the wave oven should be set to 260º C max. Condition for soldering temperature
Material:
1. Housing: PBT White/Black
2. Terminal: Phosphor Bronze Plating Gold/Tin
3. Shell: BRASS Plating Ni
4. Salt spray test for 48 hours:
Applications:
The can be used in mobile phones, CD players, cordless telephones, MP3, MP4 PDA notebooks, DVD and digital camera.
Specification:
| Eelectrical Characteristics |
| Contact Curren Rating |
0.5A Min. |
| Voltage Rating |
40V AC (rms) |
| Withstanding Voltage |
500V AC for 1 Min. |
| Insulation Resistance |
100 Megaohms Min. |
| Contact Resistance |
30 mΩ Max. |
| Mechanical Characteristics |
| Insertion Force |
44.1 N (4.5kgf) Max |
| Withdrawal Force |
9.8 N (1.0kgf) Min.,3 9.2N( 4.0kgf) Max. |
| Durability |
10000 cycles at 100±50 cycles per hour |
| Environmental Characteristics |
| Operating Temperature |
-25ºC to +85ºC |
Inspection for USB Connector:
| Test Description |
Requirement |
Procedure |
| Visual Inspection |
The inspection results should be compliant with the individual specification |
Before the qualification test, all these components shall be examined the Features, Construction as per applicable specification and documents |
Mechanical Performance:
| Test Description |
Requirement |
Procedure |
| Terminal/ Housing Retention Force |
0.40kgf /Pin Min. |
Measure the contact retention |
| Insertion Force & Withdrawal Force |
Insertion Force: 4.50kgf Max.
Withdrawal Force: 1.00kgf Min. |
The specimen is mounted to mounting fixtures by the normal mounting means. The peak force shall be recorded at the maximum rate of 25mm per minute |
| Durability |
After 10000 cycles test, shall be no evidence of mechanical or electric defects, and shall meet the requirements of connector using. |
10000 insertion / extraction cycles at a maximum rate of 100±50 cycles per hour. |
